Sawing a Straight Line with a Miter Saw

Sawing-a-Straight-Line-with-a-Miter-Saw

When utilizing a miter saw, it’s often that you are going to need to make straight cuts for home improvement projects. Many elements in a house consist primarily of straight lines, so it only makes sense that this is most of the cuts that you are going to be doing when using a miter saw. First, you’re going to want to secure the piece of wood that you’re going to be cutting. Find out where you want to cut it, and properly mark it using a pencil, so that you know exactly at what dimensions you’re going to cut when the saw is in operation. You’re going to want to set the saw to a 90 degree angle when you make this cut, as going straight down is the most efficient way to do it. Be sure to double check that it’s in the proper position before you cut.

Now, place the piece of wood that you want to cut onto the miter saw stand. You want to ensure that the edges of it are pressed firmly against something, so get two other boards that you’re not using. Place them up against the piece of wood that you’re trying to cut, and then those boards against the edge of the miter saw stand.(Don’t have one, check out these top picks) This will help to keep the piece of wood you’re using firm. With this, there will be no chance for it to shift while the cut is in progress. Once you’ve ensured the piece of wood is stable on the stand, now it’s time to actually perform the cut. While the miter saw is off, lower the blade onto where you want to cut to ensure that it’s following the correct path down. Once you’re ready, firmly grip the miter saw and turn it on. Be sure you have a firm grip on it, because it can kick quite a bit. Once it’s on, slowly lower it onto where you’re going to be making the cut, and press it down into the board itself.

Take it slow, and be careful not to cut too deep. Once you’ve performed the actual cut, shut the miter saw off and prepare to inspect the board. Remove everything securing it, and perform an initial visual inspection of the board. Are there gaps in the cutting? Is it blatantly uneven? If you can’t be sure, what you’re going to need to do is utilize other tools to ensure that the cut is even. A straight edge might do the job, but you can be more specific by using a level on every edge of it. Just ensure that every single angle on it is perpendicular, and to the specifications that you wanted. That way, there’s no room for error when you’re trying to make a straight cut. If it’s even all around, then congratulations, you’ve made a straight cut. It gets easier over time, as does any kind of woodworking skill. Soon, you’ll be making straight cuts in no time.

Reference: Familyhandyman | Mitersawbuzz | Instructables